Standard fixings for support systems
Standard fixation elements for modular support systems – clips, couplers, clamps, threaded rods, air duct fasteners, bolts, nuts, screws and more
17 Products
Filter
- Description
- Electrogalvanized threaded rod
- Material composition
- Carbon steel - AISI 1008, A36
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Hot-dip galvanized (HDG) flat washer corresponding to ISO 7089
- Material composition
- Steel - DIN EN ISO 7089
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light duty
- Description
- Electrogalvanized washer (imperial)
- Material composition
- Carbon steel - AISI 1005 through 1035
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Stainless steel washer (imperial)
- Material composition
- Stainless steel SS316
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Hot-dip galvanized (HDG) grade 8 hexagon nut corresponding to DIN 934
- Material composition
- Steel grade 8
- Surface finish
- Outdoor Coated - HDG
- Base material type
- n/a
- Description
- Electrogalvanized hexagon nut (imperial)
- Material composition
- Carbon steel - ASTM A563 Grade A
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Stainless steel hexagon nut (imperial)
- Material composition
- Stainless steel SS316
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Electrogalvanized threaded rod coupler (imperial)
- Material composition
- Carbon steel - ASTM A563 Grade A
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Electrogalvanized hexagon bolt
- Material composition
- Carbon steel - ASTM A 307
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Stainless steel hexagon bolt
- Material composition
- Stainless steel SS316
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Eye coupler for joining the hanger rod to structural steel
- Base material type
- Steel, Concrete, Wood
- Material composition
- Carbon steel
- Surface finish
- Indoor Coated - Pre-galvanized
- Description
- Galvanized air duct bracket for fastening light ventilation ducts overhead
- Noise reduction
- 18 dB (A)
- Material composition
- DD11 steel - DIN EN 10111, EPDM
- Surface finish
- Indoor Coated - Electro galvanized
- Description
- Galvanized air duct bracket for fastening heavy ventilation ducts overhead
- Noise reduction
- 12 dB (A)
- Material composition
- Angle: St1203 - DIN EN 10130, Plate: DC01-A-g - DIN EN 10130
- Surface finish
- Indoor Coated - Electro galvanized
- Description
- Galvanized bored plate for fire-tested trapeze assembly and anchoring
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Hot-dip galvanized (HDG) bored plate for trapeze assembly and anchoring (imperial)
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Stainless steel (A4) bored plate for trapeze assembly and anchoring (imperial)
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Slotted washer and split nut for quick installation of trapeze hangers
- Material composition
- Carbon steel
- Surface finish
- Indoor Coated - Electro galvanized
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)